How to Use Server Management in Access Gateway - AnySecura Manual

Welcome! This guide will show you how to manage the servers connected through your AnySecura Access Gateway. You'll learn to view all connected servers from the console, giving you clear visibility into your protected network's endpoints.

From there, you can control each server's status and configure its disaster recovery relationship with the access device. This allows you to ensure operational continuity or temporarily isolate a server from the network as needed.

When a server is connected to the access device, compliant clients on the server can access the protected network managed by the access device.

After successfully adding the access device in the console under "Tools -> Access Gateway Management," you can view the connected servers in the access device's web management interface under "Server Management." You can modify disaster recovery settings between the server and the access device, as well as enable/disable the server. When disabled, the connection between the server and the access device will be disconnected, and the disaster recovery settings will not take effect.