38.10 Status Information
You can view the device's relevant status information, including:IP information passing through the device、Device traffic information、CPU usage information、Memory usage information、Disk usage information
38.10.1 IP Information
In the IP information section, you can view details about the computers currently passing through the gateway device, including: network address, last online time, block status, and current status indicator.
| Attribute Name |
Description |
| IP Address |
The network address of the computer. |
| Last Online Time |
The last time the computer communicated through the gateway device. |
| Block Status |
The current block status of the computer. If blocked, the status is "Blocked"; if not, the status is empty. |
| Block Time |
The most recent time the computer was blocked. |
| Current Status |
The current status identifier of the computer. |
Different types of computers are associated with a specific current status, and each status corresponds to a blocking state. The details are as follows:
| Current Status |
Description |
Corresponding Block Status |
| Empty |
No client installed |
Computers within the control range will show "Blocked", those outside will show empty |
| Compliant (Authorized) |
Client installed and complies with security policies. Currently authorized by the server |
Empty, not blocked |
| Compliant (Trusted) |
Client installed and complies with security policies. Currently authorized by trust package |
Empty, not blocked |
| Compliant (Authorized + Trusted) |
Client installed and complies with security policies. Currently authorized by both server and trust package |
Empty, not blocked |
| Client (Non-Compliant) |
Client installed but does not comply with security policies |
Blocked |
| Compliant (Temporary) |
Client installed and complies with security policies, but temporarily allowed after being offline |
Empty, not blocked |
| Compliant (Offline) |
Client installed and complies with security policies, but no communication through the gateway device |
Empty, not blocked |
| Whitelist |
Computer added to the whitelist |
Empty, not blocked |
| Blacklist |
Computer added to the blacklist |
Blocked |
| Visitor |
Computer accessing the network via visitor authentication |
Empty, not blocked |
| Disaster Recovery Open |
Computer allowed access due to disaster recovery settings
Note: In the device's web management interface, the "Server Management" section will show the servers connected to the device. When a connection issue occurs, disaster recovery settings will take effect. |
Empty, not blocked |
Current Status
A computer may have multiple statuses at the same time, and the priority of these statuses is as follows:
Blacklist > Whitelist > Visitor > Client (Compliant and Non-Compliant)
When a computer has more than one status, the status with the highest priority takes precedence, and the corresponding blocking state is applied. For example, if a client computer does not meet the security conditions but is also added to the whitelist, its current status will be "Whitelist," and the blocking state will be "empty."
38.10.2 Device Traffic Information
You can view the traffic-related information for the current device. It allows you to switch between viewing real-time, last 10 minutes, last 1 hour, last 24 hours, last 7 days, and last 30 days' data.
38.10.3 CPU Usage Information
You can view the current CPU usage information of the device. It allows you to switch between viewing real-time, last 10 minutes, last 1 hour, last 24 hours, last 7 days, and last 30 days' data.
38.10.4 Memory Usage Information
You can view the current memory usage information of the device. It allows you to switch between viewing real-time, last 10 minutes, last 1 hour, last 24 hours, last 7 days, and last 30 days' data.
38.10.5 Disk Usage Information
You can view the current disk usage information of the security gateway device.
Don't see what you're looking for?
