9.2 Security Check Settings

Select Security Check → Security Check Settings to configure security check policies. These policies verify specified security items on client machines. Clients that fail the checks can have their network access blocked, ensuring compliance with management rules.

Policy Attributes Description:

Attribute	Description
Check Condition	When adding a policy, you must first select a security check condition. Each policy can include only one condition. Once selected, the condition will be displayed here. Click the to view an overview of the condition. Conditions are system-specific: for example, a Windows security condition in a policy applied to both Windows and Linux clients will only be executed on Windows clients.
Detection	Options: Detect or Do Not Detect. Selecting Detect triggers a check based on the selected condition. Selecting Do Not Detect disables security checking and related settings below.
Client Status	Options: All, Online Only, Offline Only. All executes the policy regardless of client status. Online Only executes only when clients are online. Offline Only executes only when clients are offline.
Alarm	Enable to display an alert on the console when a client fails a security check.
Alarm Level	Sets the severity of the alarm: Low, Important, Critical.
Warning	Enable to show a warning when detection mode is Detect and the check fails.
Warning Message	Configure which warning messages are displayed. Warnings appear in both the tooltip bubble and the security check results window.
Show Detection Results	Enable to display the detection results.
Show Detection Details	Enable to display detailed detection results. When conditions use wildcards or have multiple matches, multiple details are shown.
Warning Interval	Sets the interval (in minutes) for warning pop-ups on clients that fail the check.
Block Network	Enable to prevent network access when detection mode is Detect and the client fails the check.
Exception Addresses	Specify exception addresses, separated by commas. Blocked clients can still access these addresses.
Block Access	This option appears only if AnySecura is connected to an access control device. Enable to block clients from network access when they fail the check.